Brother SV-100B Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Software Brother SV-100B. Brother SV-100B 2 páginas. Document viewer

Imprimir página

Quickstart Guide

Thank you for purchasing the BROTHER DOCUMENT VIEWER

SV-100B.

The Quickstart Guide provides a simple explanation of the

operating procedures leading up to the use of the SV-100B

(herein referred to as the unit).

Carefully read "SV-100B User's Guide (Main Unit)" and

"SV-Manager User's Guide (PC Software)" for cautionary

points and detailed explanations ensuring safe operation

and increased convenience when using this equipment.

Trademarks

The names of the operating systems have been abbreviated in

this document.

The Official Name of Windows

XP is Microsoft

Windows

operating system.

The Official Name of Windows

Vista is Microsoft

Windows

Vista

operating system.

Microsoft

, Windows

, Excel, Word, Power Point

, and Windows

Mobile

are registered trademarks of the Microsoft

Corporation in the US and other countries.

Bluetooth

is a registered trademark of Bluetooth SIG, Inc.

Brother Industries has a license to use this name.

Acrobat

and Adobe are registered trademarks or trademarks of

Adobe Systems Incorporated in the US.

microSD

is a trademark of SD Association.

Any other company, product, or service name listed in this

document is the registered trademark or trademark of the

respective company

Brother International Corporation

100 Somerset Corporate Boulevard Bridgewater,

NJ 08807-0911 USA

TEL : (908) 704-1700

LW9135001

Introduction

This device is an easily portable, convenient document viewer that uses

electronic paper. This device makes a large amount of documents portable

and the contents can be immediately displayed. Even when the power is

turned OFF, the contents can still be displayed. The device can be used for

extended periods as the device is set to power-saving mode even while the

device is displaying a document.

Store this document in a safe and readily accessible location after

reading.

· The contents of this document may change without prior notice.

· The contents of this document, in part or in whole, may not be duplicated

or reprinted without prior consent.

· Although this document has been checked for accuracy, contact us if there

are any questionable points or errors.

· This company shall not be responsible for any damage cause by

earthquakes, fires (unless this company is found liable), third party acts,

other accidents, intentional act or negligence by the customer, misuse, or

other special conditions.

· This company shall not be responsible for any other damage (loss, loss of

income, loss of earnings, interruption of business, loss of means of

communication) caused by the use or the unusable state of this device.

· In the event that this device is defective due to the manufacturing process

of this company, this product shall be replaced. This company shall not be

obligated to replace the product under any other circumstance.

· This company shall not be responsible for any damage caused by the

malfunction of the device due to the connection of third party devices or

software.

This software is based in part on the work of the Independent JPEG Group.

Federal Communications Commission (FCC) Declaration of Conformity

(For USA Only)

Responsible Party: Brother International Corporation

100 Somerset Corporate Boulevard Bridgewater, NJ

08807-0911 USA

TEL: (908) 704-1700

declares that the product

Product Name: Brother Document Viewer SV-100B

Model Number: SV-100B

complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

The enclosed interface cable should be used in order to ensure

compliance with the limits for a Class B digital device

FCC WARNING

Changes or modifications not expressly approved by Brother

Industries, Ltd. could void the user's authority to operate the

equipment.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Preparations Before Use

Confirm the items included before using the device.

Confirm the Included Items

Confirm the unit and the items included.

Main Unit

Soft Case

microSD Memory Card

Special Recharging AC Adapter

(2GB)

Battery (Special Rechargeable

USB Cable

Lithium Ion Battery)

Quickstart Guide

CD-ROM

(including Quickstart Guide,

* This document

User's Manual, and bundled

software)

Insert the Battery and Memory Card

into the Unit

[1] Slide and remove the battery cover.

Push the mark in the center to unlock

and open. Slide and remove the

cover.

[2] Securely insert a new battery into

the unit ensuring the terminals make

contact.

Insert the battery and match

the + and - signs printed on

the face of the battery to the

terminals on the unit.

[3] Turn the metallic terminals of the

memory card to the display panel

and push until the memory card locks.

Be careful not to touch the

metallic terminals when

handling the memory card.

This may result in poor

Press

contact.

[4] Securely close the battery cover.

Ensure that the battery cover

has been securely closed. If

the cover is not properly

closed, water leakage may

cause this device to

malfunction.

Charge the Unit

[1] Open the connector cover.

[2] Connect the round plug of the AC

adapter to the unit's AC adapter

connector and the power plug to

an AC100V outlet.

[3] Confirm that the Status Lamp

(orange light on the left) is lit.

It takes about 3 hours to charge

the battery.

Lit

[4] Charging is complete when the Status Lamp (orange

light on the left) turns off. Remove the AC adapter plug

from the unit.

The battery can be charged using a USB connection

with the PC. It takes about 5 hours to charge the

battery in this manner.

Confirm that the Unit can be

Powered ON and OFF.

Mark

Confirm that the unit operates by turning the power ON/OFF.

[1] Press

[2] After the Status Lamp (green) flashes, confirm that the

folder name appears on the screen.

Confirm that the name of the top

folder "SV-100B" and the

subfolders, "Main folder" and

"Security folder", display.

[3] Press

[4] When the Status Lamp (green)

flashes, confirm "Shut down

automatically in 10 sec."

(Continued overleaf)

Connector

Cover

Orange Lamp

Press