Fujitsu LifeBook Stylistic Q550 Primeros pasos - Página 3

Navegue en línea o descargue pdf Primeros pasos para Tableta Fujitsu LifeBook Stylistic Q550. Fujitsu LifeBook Stylistic Q550 17 páginas. Q series
También para Fujitsu LifeBook Stylistic Q550: Ficha de datos (6 páginas), Manual de introducción (17 páginas), Manual Bios (23 páginas), Manual de inicio rápido (2 páginas)

Fujitsu LifeBook Stylistic Q550 Primeros pasos
Initial Start Up
Installing a Pen Tether
AC Adaptor
Power Suspend/Resume Switch
DC Power Jack
Wireless Device Switch
1. Install the AAAA-battery into the
pen (see diagram on blister pack)
and install the Pen Tether.
• Push one end of the tether under the slot on the top of the pen,
and then thread the opposite end of the tether through the loop.
• Insert the other end of the pen tether through the attachment
point on the STYLISTIC
the large loop in the tether.
THE LITHIUM POLYMER BATTERY IS NOT CHARGED UPON
PURCHASE. YOU WILL NEED TO CONNECT THE AC ADAPTER TO
CHARGE YOUR BATTERY OR USE YOUR STYLISTIC TABLET PC.
IT WILL TAKE APPROXIMATELY 5 HOURS TO INITIALLY CHARGE
THE BATTERY.
There is an indicator on the battery. The indicator color means:
Green: 50% - 100% charge
Orange: 49% - 10% charge
Red: under 10% charge
2. Connect AC Power
• Be sure that you have the battery installed.
• Plug the AC cord into the AC Adapter.
• Plug the DC output cable into the DC power jack of your Tablet PC.
• Plug the AC adapter into an AC electrical outlet.
3. Enable Connection to the Internet
or Network
• Slide the Wireless Device Switch to "on" to connect to a
wireless router.
• You will need to be set up with an Internet Service Provider (ISP)
to connect to the Internet.
• Important: During the setup procedure, do not disconnect the
power supply, press any buttons, or connect and use any
peripheral devices.
4. Boot Your Tablet PC
Note: When you turn on your STYLISTIC Tablet PC for the first
time, it will display a Fujitsu logo on the screen. It will then
perform a Power On Self Test. After satisfactory completion of
this test, your Tablet PC will load your operating system.
• Slide the Power/Suspend/Resume switch, to "on." It is located
on the bottom edge of the right side (when the system is
held horizontally).
• If you do nothing the system will load the operating system and
Windows
®
Welcome will begin.

5. Starting Windows the first time

THE FIRST TIME YOU INITIALIZE YOUR WINDOWS SYSTEM,
THE SCREEN WILL BE BLANK FOR APPROXIMATELY TWO
MINUTES. THIS IS NORMAL. AFTER INITIALIZATION, A "SET UP
WINDOWS" DIALOG BOX WILL APPEAR.
IMPORTANT: DURING THE SETUP PROCEDURE, DO NOT
DISCONNECT THE POWER SUPPLY, PRESS ANY BUTTONS,
OR ATTACH ANY PERIPHERAL DEVICES.
IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU
WILL BE ASKED TO REVIEW THE LICENSE AGREEMENTS FOR
INFORMATION ON RETURNING WINDOWS OR TO SHUT DOWN
YOUR STYLISTIC TABLET PC.
YOU CANNOT USE YOUR TABLET PC UNTIL YOU HAVE ACCEPTED
THE LICENSE AGREEMENTS. IF YOU STOP THE PROCESS YOUR
TABLET PC WILL RETURN TO THE BEGINNING OF THE WINDOWS
WELCOME PROCESS, EVEN IF YOU SHUT YOUR TABLET PC DOWN
AND START IT UP AGAIN.
Tablet PC, and feed the pen through
®
3