Brother ADS-2600W Manual de configuración rápida - Página 13

Navegue en línea o descargue pdf Manual de configuración rápida para Escáner Brother ADS-2600W. Brother ADS-2600W 23 páginas. Web connect guide - english
También para Brother ADS-2600W: Manual (20 páginas), Manual de seguridad del producto (20 páginas), Manual de configuración rápida (37 páginas)

Brother ADS-2600W Manual de configuración rápida
For Wireless Network Users
Setup using the
10
installation DVD-ROM
and a USB cable
(Windows
Note
This example shows Windows
Mac installation, insert the installation DVD-ROM
into your DVD-ROM drive and double-click Start
Here OSX to install. Select Wireless installation
and follow the Wireless Device Setup instructions
on your computer screen.
a
Put the supplied DVD-ROM into your
DVD-ROM drive. If the model name screen
appears, choose your machine. If the language
screen appears, choose your language.
b
The DVD-ROM Top Menu will appear. Click
Install MFL-Pro Suite and click Yes if you
accept the license agreements. Follow the
on-screen instructions.
c
Choose Wireless Network Connection, and
then click Next.
d
When Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are using a firewall other than the
®
Windows
Firewall, see the instructions
provided with your firewall software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
If you still have trouble with your network
connection, add UDP port 137 and 161.
e
Choose Yes, I have a USB cable to use for
installation. and then click Next.
Note
If the Important Notice appears, check the box
after you confirm the SSID and Network Key, and
then click Next.
®
& Macintosh)
®
installation. For
f
Temporarily connect the USB cable directly to
the computer and the machine.
If the confirmation screen appears, check the
box and click Next, go to g.
Otherwise, go to h.
Note
For instructions on connecting the USB cable to
the USB port of your machine, see Connect the
USB cable on page 6.
g
When the following screen appears, check Yes
if you want to connect to the listed SSID. Click
Next and go to j.
h
When the following screen appears, the wizard
will search for wireless networks available to
your machine. Choose the SSID that you wrote
down for your network in step 9-a on page 11,
and then click Next.
Note
• If the list is blank, check that the access point
has power and is broadcasting the SSID, and
then see if the machine and the access point
are within range for wireless communication.
Then click Refresh.
• If your access point is set to not broadcast the
SSID you can manually add it by clicking the
Advanced button. Follow the on-screen
instructions for entering the Name (SSID), and
then click Next.
13