Brother DSmobile DS-640 Manual de configuración rápida - Página 7
Navegue en línea o descargue pdf Manual de configuración rápida para Escáner Brother DSmobile DS-640. Brother DSmobile DS-640 11 páginas.
También para Brother DSmobile DS-640: Manual de configuración rápida (10 páginas)
Imprimir página
Product Safety Guide
Tips on using the
rechargeable Li-ion battery
(DSmobile DS-940DW
only)
• Charge the rechargeable Li-ion battery before use.
Do not use the scanner until the rechargeable
Li-ion battery has been fully charged.
• The rechargeable Li-ion battery charging can
take place in 5 °C - 39 °C environments. If the
surrounding temperature is out of this range, the
rechargeable Li-ion battery will not be charged,
and the battery indicator will remain lit.
• If the scanner is used when both the rechargeable
Li-ion battery is installed and the scanner is
connected to your computer, charging may stop even
if the rechargeable Li-ion battery has not been fully
charged.
Rechargeable Li-ion
battery characteristics
(DSmobile DS-940DW
only)
Understanding the properties of the rechargeable
Li-ion battery will allow you to optimise its usage.
• Using or storing the rechargeable Li-ion battery
in a location exposed to high or low temperatures
may accelerate its deterioration. In particular,
using a rechargeable Li-ion battery with a high
charge (90% or more) in a location exposed to
high temperatures will considerably accelerate
battery deterioration.
• Using the scanner while the rechargeable Li-ion
battery is installed and charging may accelerate
the battery's deterioration.
• If the rechargeable Li-ion battery will not be used
for a long period of time, we recommend charging
it every three months.
• While the rechargeable Li-ion battery is charging,
the scanner may become warm. This is normal,
and the scanner may be used safely. If the
scanner becomes extremely hot, stop using it.
Surroundings temperature range
Charge
Standard discharge current 0.24 A -10 °C - 60 °C
Maximum discharge current 1.2 A
Less than
1 month
Battery
Less than
(Installed)
3 months
Less than
1 year
Charging parameters
Maximum charging voltage
Maximum charging current
NOTE
We do not recommend removing the rechargeable
Li-ion battery unless disposing of the scanner.
Turn the scanner off and remove the USB cable from
the scanner before removing the rechargeable Li-ion
battery.
1. Place the scanner face down and remove the
2. Disconnect the rechargeable Li-ion battery
3. Push the release tab (as illustrated) to remove the
4. Cover the rechargeable Li-ion battery terminals
0 °C - 45 °C
0 °C - 60 °C
-20 °C - 45 °C
-20 °C - 35 °C
-20 °C - 25 °C
NOTE
For more information about handling the
4.35 Vdc
rechargeable Li-ion battery, see the applicable
instructions and warnings in this guide.
1200 mA
How to remove the
rechargeable Li-ion battery
(DSmobile DS-940DW only)
Side Cover using a flathead screwdriver.
connector from the Printed Circuit Board
Assembly (PCBA). Do not disconnect the
Flexible Flat Cable (FFC).
rechargeable Li-ion battery from the Side Cover.
with tape and dispose of the battery according to
the applicable local regulations.
2
3
1
4
7