Fujitsu D1451 Manual técnico - Página 27

Navegue en línea o descargue pdf Manual técnico para Placa base Fujitsu D1451. Fujitsu D1451 42 páginas. Siemens

Upgrading main memory

Technical data

Technology:

DDR 200 or DDR 266 unbuffered DIMM modules

184-Pin; 2.5 V; 64 Bit, no ECC

Size:

128 Mbytes up to 2 Gbyte DDR-SDRAM

Granularity:

128, 256, 512 or 1024 Mbyte for one socket

A current list of the memory modules recommended for this mainboard is available on the Internet

at: www.fujitsu-siemens.de/mainboards.

At least one memory module must be installed. Memory modules with different memory capacities

can be combined.

You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not

supported.

DDR-DIMM memory modules must meet the PC2100 or PC2700 specification.

Installing a memory module

Push the holders on each side of the memory compartment outwards.

Insert the memory module into the location (1).

At the same time flip the lateral holders upwards until the memory module snaps in place (2).

A26361-D1451-Z120-1-6319

Installing and removing processors

English - 17