Fujitsu D2440 Manual técnico - Página 15

Navegue en línea o descargue pdf Manual técnico para Placa base Fujitsu D2440. Fujitsu D2440 32 páginas. For rx330 s1

Features

3.2

Main memory

The system board supports up to 32 Gbyte main memory. 8 slots (4 banks with

2 modules) are available for the main memory. Each memory bank can be

populated with 512 Mbyte (only D2440), 1 Gbyte, 2 Gbyte or 4 Gbyte ECC

DDR2 SDRAM memory modules.The maximum main memory is 16 Gbyte for

installation with one CPU and 32 GByte with two CPUs.

D2440

ECC DDR2-533 (PC4300) or ECC DDR2-667 (PC5300)

D2932

ECC DDR2-800 (PC6400)

ECC with memory scrubbing is supported.

You will find the descriptions how to install memory modules in the

Options Guide of your server.

Module population

Figure 2: Main memory

– If the memory modules are populated in pairs, each pair must consist of

identical memory modules (2-way interleaved mode)

– The module capacity between pairs can differ: pair 2A/2B can be populated

with two 1 GMbyte modules and pair 1A/1B with two 2 Gbyte modules.

– CPU 2 must be installed to access DIMM3A/3B and DIMM4A/4B.

D2440/D2932 (RX330 S1)

CPU 2

DIMM4A

DIMM4B

DIMM3A

DIMM3B

Technical Manual

Main memory

DIMM1B

DIMM1A

DIMM2B

DIMM2A

CPU 1