Fujitsu D2530 Manual técnico - Página 16
Navegue en línea o descargue pdf Manual técnico para Placa base Fujitsu D2530. Fujitsu D2530 35 páginas. For econel 200 s2
![Fujitsu D2530 Manual técnico](/uploads/products/server2/2463819/2463819.png)
PCI bus
3.3
PCI bus
slot 6
slot 5
slot 4
slot 3
slot 2
slot 1
Figure 3: PCI slots
PCI slots
The following table shows an overview of the PCI slots:
PCI slot
64Bit/
32Bit
1
2
3
4
32 Bit
5
6
PCI IRQ Line x - Assignment of the PCI interrupts
PCI IRQ Line x defines which ISA interrupts are used for the separate PCI slots.
If you select Auto in the BIOS setup, the interrupts are assigned automatically
and no further settings are required.
Multifunctional PCI boards or boards with an integrated PCI-to-PCI bridge can
use several PCI interrupts (INTA#, INTB#, INTC#, INTD#). Monofunctional PCI
boards (default) only use one PCI interrupt (INTA#) per PCI slot.
16
PCI-Express x16
PCI-Express x8
PCI 33MHz
PCI-X 133/100 MHz
PCI-X 133/100 MHz
PCI-X 133/100 MHz
Frequency
Description
in MHz
133/100
PCI-X bus slot, IOOP
133/100
PCI-X bus slot, IOOP
133/100
PCI-X bus slot, IOOP
33
PCI bus slot
PCI-Express x8 slot (x4 accessed)
PCI-Express x16 slot (x8 accessed)
Technical Manual
Features
D2530 (Econel 200 S2)