Fujitsu D3030 Manual técnico - Página 22

Navegue en línea o descargue pdf Manual técnico para Placa base Fujitsu D3030. Fujitsu D3030 38 páginas. System board for bx920 s2

Main memory

SDDC (Chipkill) is supported only for registered memory modules.

Main memory operating modes

There are four operating modes for the main memory:

– Independent channel mode (maximum population)

The populated memory of the six channels (A - F) can be used completely

(max. 144 GB).

– Mirrored channel mode (maximum security)

Only the populated memory of the two channels A and D can be used (max.

48 GB). The channels B and E serve as safeguarding against failure. The

memory belonging to the channels B and E contain the mirrored data of the

memory belonging to channel A and D. The channels C and F are not used.

– Performance channel mode (maximum performance)

The populated memory of the six channels (A - F) can be used completely

(max. 144 GB).

– Spare channel mode (large population and large security)

Only the populated memory of the four channels A, B, D and E can be used

(max. 96 GB). The channels C and F serve as safeguarding against failure.

Spare channel mode is only supported by Intel

processor series.

Depending on the mode of operation there are different population

requirements for the main memory.

For system relevant information please refer to the configurator of the

server:

https://sp.ts.fujitsu.com/dmsp/docs/cnfgbx920s2.pdf

http://primeserver.fujitsu.com/primergy/system.html

market)

Technical Manual

Xeon

5600

(for the EMEA market)

(for the Japanese

D3030 (BX920 S2)