Fujitsu D3049 Manual técnico - Página 13

Navegue en línea o descargue pdf Manual técnico para Placa base Fujitsu D3049. Fujitsu D3049 36 páginas. System board for primergy tx140 s1 / tx120 s3

Imprimir página

Modules with Electrostatic-Sensitive Devices

Modules with electrostatic-sensitive devices are identified by the following

sticker:

Figure 1: ESD label

When you handle components fitted with ESDs, you must always observe the

following points:

Switch off the system and remove the power plugs from the power outlets

●

before installing or removing components with ESDs.

You must always discharge static build-up (e.g. by touching a grounded

●

object) before working with such components.

Any devices or tools that are used must be free of electrostatic charge.

●

Wear a suitable grounding cable that connects you to the external chassis

●

of the system unit.

Always hold components with ESDs at the edges or at the points marked

●

green (touch points).

Do not touch any connectors or conduction paths on an ESD.

●

Place all the components on a pad which is free of electrostatic charge.

●

For a detailed description of how to handle ESD components, see the

relevant European or international standards (EN 61340-5-1,

ANSI/ESD S20.20).

TX140 S1 / TX120 S3

Technical Manual

Important information