Fujitsu D3183 Especificaciones - Página 19
Navegue en línea o descargue pdf Especificaciones para Placa base Fujitsu D3183. Fujitsu D3183 20 páginas. Mainboard
![Fujitsu D3183 Especificaciones](/uploads/products/server2/2464470/2464470.jpg)
- 1. Deutsch
- 1. Table of Contents
- 1. Kurzbeschreibung des Mainboards
- 1. Anschlüsse und Steckverbinder
- 1. Hauptspeicher Ein-/Ausbauen
- 1. BIOS Update
- 1. BIOS-Update unter Windows mit dem Programm Deskflash
- 1. BIOS-Update mit einem USB-Stick
- 2. English
- 2. Brief Description of Mainboard
- 2. Interfaces and Connectors
- 2. Installing/Removing Main Memory
- 2. BIOS Update
- 2. BIOS Update under Windows with Deskflash Program
- 2. BIOS Update Using a USB Stick
Installing/removing main memory
Installing/removing main memory
Technical data
Technology
Total size
Module size
A current list of the memory modules recommended for this mainboard is available
on the Internet at: "http://ts.fujitsu.com/mainboards".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
Only unbuffered DDR3 memory modules without ECC may be used.
DDR3 memory modules must comply with the PC3-10600 or PC3-12800 specification.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
Depending on how the system is configured, the visible main memory can be reduced.
SO-DIMM 1 Channel A
SO-DIMM 1 Channel B
Slot to be used
Channel A, slot 1
Channel B, slot 2
The installation/removal is described in the "Basic information on mainboard" manual.
Fujitsu Technology Solutions
DDR3 1333 / 1,600 MHz unbuffered SO-DIMM modules 204 pin; 1.5 V;
64 bit, no ECC
1 to 16 GByte DDR3
1, 2, 4 or 8 GByte for one module
Number of memory modules inserted
1
x
English - 5
2
x
x
15