Fujitsu MB91460 SERIES Nota de aplicación - Página 12
Navegue en línea o descargue pdf Nota de aplicación para Placa base Fujitsu MB91460 SERIES. Fujitsu MB91460 SERIES 23 páginas. 32-bit microcontroller
También para Fujitsu MB91460 SERIES: Manual del usuario (45 páginas), Primeros pasos (41 páginas), Nota de aplicación (26 páginas), Nota de aplicación (29 páginas), Nota de aplicación (29 páginas)
Imprimir página
Otherwise please check the following items under 'Project' ->'Setup Project...' -> 'MCU' tab:
•
•
This kind of emulation system can be used in two different ways:
•
The external Flash memory on SK91461 (4MB) connected to CS0 can be used
•
The external SRAM memory on SK91461 (1MB) connected to CS1 can be used.
The template project therefore provides two debug configurations.
•
EMU_FLASH_CS0_USB.sup
•
EMU_SRAM_CS1_USB.sup
For proper startup of the debug sessions the template project includes some procedure file
in folder PRC. Please refer to them if your project is not based on the template.
MCU-AN-300029-E-V1
MB91461 Emulation
Chapter 3 Evaluation system with MB91461R
Figure 7: Select project configuration STANDALONE
Bus Mode: External ROM external Bus
Bus width: 16bit
Figure 8: Configure Bus Mode External ROM
- 12 -
© Fujitsu Microelectronics Europe GmbH