Fujitsu Siemens D1156 Manual técnico - Página 9

Navegue en línea o descargue pdf Manual técnico para Placa base Fujitsu Siemens D1156. Fujitsu Siemens D1156 22 páginas.

Introduction

This system board is available in different configuration levels. Depending on the

hardware configuration of your device, it may be that you cannot find several options in

the system board, even though they are described.

You may find further information in the description "BIOS Setup".

The meanings of the symbols and fonts used in this manual are as follows:

Pay particular attention to texts marked with this symbol. Failure to observe this warning

endangers your life, destroys the system, or may lead to loss of data.

Supplementary information, remarks and tips follow this symbol.

Texts which follow this symbol describe activities that must be performed in the order shown.

This symbol means that you must enter a blank space at this point.

Ú This symbol means that you must press the Enter key.

Texts in this typeface are screen outputs.

Texts in this bold typeface are the entries you make via the keyboard.

Texts in italics indicate commands or menu items.

"Quotation marks" indicate names of chapters and terms that are being emphasized.

Store this manual close to the device. If you pass on the device to third parties, you should also

pass on this manual.

Be sure to read this page carefully and note the information before you open the device.

You cannot access the components of the system board without first opening the device.

How to dismantle and reassemble the device is described in the Operating Manual

accompanying the device.

Please note the information provided in the chapter "Safety" in the Operating Manual of

the device.

Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore

essential to observe the instructions in the chapter

lithium

battery".

A26361-D1156-Z120-6-7419

"Add-on

modules" -

"Replacing the

English - 1