Fujitsu SK-96620_350-64PMC(1) Manual del usuario - Página 36
Navegue en línea o descargue pdf Manual del usuario para Placa base Fujitsu SK-96620_350-64PMC(1). Fujitsu SK-96620_350-64PMC(1) 47 páginas. F²mc-16lx/fx family, mb96620/350 series, mb90350 series
Imprimir página
6.2.2 UART "B"
In case of programming via UART "B" the jumper settings of JP6 and JP8 must be
configured as follows:
MCU
Jumper
Series
JP6
(SIN7_R)
MB96620
JP8
(SOT7_R)
JP6
(SIN7_R)
MB96350
JP8
(SOT7_R)
Table 6-3: Jumper Settings for Programming via UART "B"
Note:
Programming of MB90350 Series is not possible via UART "B".
UART8_R means a relocation of the UART8 to other port pins. Additionally to the
usual port pin configurations the relocated UART pins have to be activated in the
peripheral resource relocation register 8 (PRRR8).
PRRR8_SIN8_R :=1
PRRR8_SOT8_R :=1
© Fujitsu Semiconductor Europe GmbH
SK-96620_350-64PMC(1) User Guide
Chapter 6 Programming the internal Flash Memory
Programming
UART
UART7
UART3
- 36 -
Setting
Description
1-2
SIN7_R is connected to RxD of X5
1-2
SOT7_R is connected to TxD of X5
2-3
SIN3 is connected to RxD of X5
2-3
SOT3 is connected to TxD of X5
UG-960028-12