Indesit EVO 2 Laundry Información de servicio - Página 38

Navegue en línea o descargue pdf Información de servicio para Lavadora Indesit EVO 2 Laundry. Indesit EVO 2 Laundry 39 páginas.

ERRORS

If during the programme the software freezes or the appliance does not respond the following action should be taken.

Switch off appliance, wait 30 seconds and re-start the process. In certain situations the EMIT unit can freeze. To rectify,

restart the EMIT, reconnect and check settings.

–

'Comm Port Closed'

This can appear after first installing USB drivers or when first connecting the USB cable when

opening the software -

Removing the cable and then reconnecting it normally overcomes this issue.

'Communication Error'

– Normally due to a mismatch of the Comm Port setting of the software compared with the

computer being used

- Ensure USB lead is plugged into correct socket and correct version of Wash Doctor is being

used.

–

Impossible to read key'

Bad connection of key or cable between appliance and computer. Check connections.

Wrong information displayed in Washing Machine Doctor' –

Ensure appliance is disconnected from the mains

supply for the correct time period after reprogramming an Eeprom before using WMD for diagnostics. Ensure correct file

was downloaded to Eeprom.

'Not Possible to do the checksum'

Means that the software cannot match the type of file or Eeprom to the version of programme being used – Check ALL

settings, key connected and 'Hardware Key' type is switched to Black icon.

'Error to read board model of display'

Restart the programme and retry connection.

Remember: All settings and connections need to be checked carefully if a problem appears. It is important to select the

correct appliance type. If you cannot get the programme to work contact your EMIT Helpdesk.