Indesit PWE 91272 S Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Lavadora Indesit PWE 91272 S. Indesit PWE 91272 S 24 páginas. Washing machine

Imprimir página

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the

the START/PAUSE indicator light will flash slowly in a

blue colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes and wash cycles on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent into

the relevant compartments as described in "Detergents

and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Use the WASH CYCLE

SELECTOR knob to select the desired wash cycle. A

temperature and spin speed is set for each wash cycle;

these values may be adjusted. The duration of the cycle

will appear on the display.

6. CUSTOMISE THE WASH CYCLE. Use the relevant

buttons:

Modify the temperature and/or spin

speed. The machine automatically displays the

maximum temperature and spin speed values set for

the selected cycle, or the most recently-used settings

if they are compatible with the selected cycle. The

temperature can be decreased by pressing the

button, until the cold wash "OFF" setting is reached.

The spin speed may be progressively reduced by

pressing the

(the "OFF" setting). If these buttons are pressed again,

the maximum values are restored.

Setting a delayed start.

To set a delayed start for the selected cycle, press the

corresponding button repeatedly until the required delay

period has been reached. When this option has been

activated, the

remove the delayed start setting, press the button until

the text "OFF" appears on the display.

• Press the button to enable the option; the indicator

light corresponding to the button will switch on.

• Press the button again to disable the option; the

indicator light will switch off.

If the selected option is not compatible with the set

wash cycle, the indicator light will flash and the option

will not be activated.

button, until it is completely excluded

symbol lights up on the display. To

Modify the cycle settings.

button;

If the selected option is not compatible with a previously

selected one, the indicator light corresponding to the first

function selected will flash and only the second option will

be activated; the indicator light for the option which has

been activated will be illuminated.

Note: if the

incompatible options may be activated.

The options may affect the recommended load value

and/or the duration of the cycle.

7. START THE WASH CYCLE. Press the START/

PAUSE button. The corresponding indicator light will

turn blue, remaining lit in a fixed manner, and the door

will be locked (the DOOR LOCKED

To change a wash cycle while it is in progress, pause

the washing machine using the START/PAUSE button

(the START/PAUSE indicator light will flash slowly in an

amber colour); then select the desired cycle and press

the START/PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be opened (wait

approximately 3 minutes). Press the START/PAUSE

button again to restart the wash cycle from the point at

which it was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text "END" on the display; when the

DOOR LOCKED

opened (wait approximately 3 minutes). Open the door,

unload the laundry and switch off the machine.

If you wish to cancel a cycle which has already begun,

press and hold the

and the machine will switch off.

Load balancing system

Before every spin cycle, to avoid excessive vibrations

before every spin and to distribute the load in a uniform

manner, the drum rotates continuously at a speed which

is slightly greater than the washing rotation speed. If,

after several attempts, the load is not balanced correctly,

the machine spins at a reduced spin speed. If the load is

excessively unbalanced, the washing machine performs

the distribution process instead of spinning. To encourage

improved load distribution and balance, we recommend

small and large garments are mixed in the load.

option has been selected, none of the

symbol will be lit).

symbol switches off the door may be

button. The cycle will be stopped