Indesit BA 13 S Manual de instrucciones de instalación y uso - Página 4

Navegue en línea o descargue pdf Manual de instrucciones de instalación y uso para Frigorífico Indesit BA 13 S. Indesit BA 13 S 18 páginas. Indesit fridge/freezer installation and use

Imprimir página

Electrical connection

Your appliance is now supplied with a 13 amp fused plug that

can be plugged into a 13 amp socket for immediate use. Before

using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED.

THE FOLLOWING OPERATIONS SHOULD BE CARRIED

OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse

to BS 1362 should always be used, and the fuse cover re-

fitted. If the fuse cover is lost, the plug must not be used

until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct

colour as indicated by the coloured marking or the colour that

is embossed in words on the base of the plug. Replacements

can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and

you should wish to remove it to add a cable extension or to

re-route the mains cable through partitions, units etc., please

ensure that either:

- the plug is replaced by a fused 13 amp re-wireable plug

bearing the BSI mark of approval

or:

- the mains cable is wired directly into a 13 amp cable outlet,

controlled by a switch, (in compliance with BS 5733) which

is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make

the pins unusable so that it cannot be accidentally inserted

into a socket. Instructions for connecting cable to an

alternative plug:

Important: the wires in the mains lead are coloured in

accordance with the following code:

Green & Yellow

Blue

Brown

- Earth

- Neutral

- Live

As the colours of the wires in the mains lead may not

correspond with the coloured markings identifying the

terminals in your plug, proceed as follows:

Connect Green & Yellow wire to terminal marked "E" or

or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked "L" or coloured

Red.

Connect Blue wire to terminal marked "N" or coloured Black.

If a 13 amp plug (BS 1363) is used it must be fitted with a 13

amp fuse. A 15 amp plug must be protected by a 15 amp

fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your

machine, consult a qualified electrician before use.

How to connect an alternative plug:

The wires in this mains lead are coloured in accordance with

the following code:

BLUE

BROWN

GREEN AND YELLOW

GREEN &

YELLOW

13 ampere fuse

BROWN

BLUE

Disposing of the appliance:

When disposing of the appliance please remove the plug by

cutting the mains cable as close as possible to the plug body

and dispose of it as described above.

"NEUTRAL" ("N")

"LIVE" ("L")

"EARTH" ("E")

CROSS-BAR

CORD GRIP