A-Neu Video ANI-0104POE-AU Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Media Converter A-Neu Video ANI-0104POE-AU. A-Neu Video ANI-0104POE-AU 16 páginas. 1x4 hdmi 18gbps splitter over cat6 196ft/60m

Imprimir página
A
NEUVIDEO
TRANSMITTER
FRONT PANEL
POWER SWITCH:
Press this switch to power on/off the device.
q
POWER LED:
When the device is powered on, the red power LED will be on.
w
IN LED:
When the HDMI IN port connects an active source device, the green LED will be on.
e
LOOP LED:
When the HDMI LOOP OUT port connects an active display device, the green LED will be on.
r
OUT LED (1~4):
When the CAT OUTPUT port connects an active display device, the corresponding green OUT LED will be on.
t
BACK PANEL
AUDIO OUT (COAX, L/R):
q
HDMI PORT:
w
IN:
HDMI input port, connect to HDMI source device such as DVD or set-top box with an HDMI cable.
LOOP OUT:
HDMI loop output port, connect to the HDMI display device such as TV or Monitor with an HDMI cable.
CAT OUTPUT PORT (1~4):
e
LINK SIGNAL INDICATOR LAMP (GREEN):
r
Illuminate:
Transmitter and receiver are connected.
Dark:
Transmitter and receiver are not connected.
DATA SIGNAL INDICATOR LAMP (ORANGE):
t
Illuminate:
There is signal transmission between the transmitter and the receiver.
Dark:
No signal transmission.
IR OUT:
Connect the IR Blaster cable to transmit IR signal from the CAT receiver.
y
DC 12V:
Plug the DC 12V power supply into the unit and connect the adaptor to an AC outlet.
u
(Note: The transmitter can power the receiver via a CAT cable.)
Coaxial/analog audio output port, connect to amplifer or speaker.
Connect to the CAT IN port of the CAT receiver with a CAT cable.
OPERATION CONTROLS & FUNCTIONS
4