Indesit FDEF31111 Información de servicio - Página 12

Navegue en línea o descargue pdf Información de servicio para Lavavajillas Indesit FDEF31111. Indesit FDEF31111 20 páginas.

Imprimir página
Indesit FDEF31111 Información de servicio
Indesit
Company
FAULT CODES - Basic
If there is a fault (active):
The service technician will find the machine immobilized, with the Fault indicator LEDs permanently
alight and other LEDs on the Control Panel blinking (usually On/Off, Salt and Rinse Aid).
LED Models - Fault Code LED positions
Digit and LCD display models will show the Fault Code in the display.
Refer to the Fault Code chart below for guidance.
If Warning or Last Fault is indicated:
Starting the autotest, the last Fault or the current Warning will be displayed for 20 seconds.
Once this time has elapsed, the autotest sequence starts automatically.
If the autotest reaches the end, the Last Fault will be reset.
Should the Autotest procedure be interrupted for whatever reason, data in the Last Fault memory will
be saved. N.B.: The "Last Fault detected electronically" will always be displayed.
Basic Fault Code Chart
Fault
1
ANTI-FLOODING OVERFLOW
2
WATER FILL SOLENOID VALVE FAILURE
3
DRAIN TIMEOUT
4
THERMISTOR (NTC) not compliant
5
PRESSURE SWITCH non compliant
6
WATER FILL TIMEOUT
7
WATER TURBINE damaged
8
TEMPERATURE TIMEOUT (1 hour)
9
Software recognition error.
10
HEATING ELEMENT CIRCUIT not compliant
11
WASH PUMP Failure
12
COMMUNICATION error between main board and display
13
MAIN BOARD not Working
15
VIRTUAL SENSOR - Inconsistent readings
For more detailed information refer to next page.
Service Manual UK
LED 1
LED 3
LED 2
LED 1
LED 3
LED 2
Possible Cause
12 of 20
LED 4
LED 4
LED Combination
LED 1 LED 2 LED 3 LED 4
On
Off
Off
Off
On
Off
On
On
Off
Off
Off
On
On
Off
On
Off
On
On
On
On
On
Off
Off
Off
On
Off
Off
Off
On
Off
On
On
Off
Off
Off
On
On
Off
On
On
On
On
Off
Off
Off
Off
Off
Off
Off
On
On
On
On
On
On
On
English