Indesit SX 896L PX Manual de instrucciones - Página 13

Navegue en línea o descargue pdf Manual de instrucciones para Horno Indesit SX 896L PX. Indesit SX 896L PX 20 páginas. Oven

Imprimir página

Left

Right guide

guide rail

rail

4. Finally, fit the frames on the spacers A.

! Do not place the sliding racks in position 5.

Automatic cleaning with the FAST

CLEAN function

With the FAST CLEAN mode, the internal

temperature of the oven reaches 500°C. The

pyrolytic cycle is activated, burning away food and

grime residues. Dirt is literally incinerated.

Keep children away from the appliance during the

automatic cleaning cycle as surfaces may become

very hot. Particles may ignite inside the oven as a

result of the combustion process. There is no cause for

concern: this process is both normal and hazard-free.

Before initiating the FAST CLEAN mode:

• clean the oven door;

• remove large or coarse food residues from the

inside of the oven using a damp sponge. Do not

use detergents;

• remove all accessories and the sliding rack kit

(where present);

• do not place tea towels or pot holders over the

oven handle.

! If the oven is too hot, the pyrolytic cycle may not

start. Wait for the oven to cool down.

! The programme may only be started once the oven

door has been closed.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

2. Choose which shelf

to use with the sliding

rack. Paying attention

to the direction in which

the sliding rack is to be

extracted, position joint

B and then joint C on

the frame.

3. Secure the two

frames with the guide

rails using the holes

provided on the oven

walls ( see diagram ).

The holes for the left

frame are situated at

the top, while the holes

for the right frame are

at the bottom.

To activate the Fast Clean programme:

1. Switch the control panel on by pressing the

button.

2. Press button

; the display will show the text

"Piro", "nor" and the default duration of 1:30 h

(normal cycle) alternately.

3. Press button

, then turn the TIMER knob to

adjust the default cleaning level. There are 3

different levels to choose from, each with a pre-set

duration which cannot be modified:

1. Economy (ECO): turn the knob towards "- - - - - ".

Duration 1 hour.

2. Normal (NOR): initial level. Duration 1 hour and 30

minutes.

3. Intensive (INT): turn the knob towards "+ + + + + ".

Duration 2 hours.

4. Press the

button to confirm.

5. Press the

button to begin the cleaning cycle.

An end time for the FAST CLEAN cycle (as for a

normal cooking cycle) may be programmed (see

Programming the automatic cleaning end time ).

Safety devices

• the door locks automatically as soon as the

temperature reaches a high value; the

lights up on the display;

• pressing the

button cancels the cleaning

cycle at any time;

• if a malfunction occurs, the heating elements will

be switched off;

• once the oven door has been locked, you cannot

change the duration and end time settings.

Programming the automatic cleaning end time

1. Press the

button twice: the

numerical digits on the display will begin to flash.

2. Turn the TIMER knob towards "+ + + + + " and "- - - - - " to

adjust the cleaning end time value.

3. Once you have reached the desired end time,

press the

button again. The display will show

the duration, the cleaning end time and the set

cleaning level alternately.

4. Press the

button to activate the programmed

mode.

Programming has been set when the

buttons are illuminated.

icon

icon and the

and