Indesit KN3E517 Manual de instrucciones - Página 18

Navegue en línea o descargue pdf Manual de instrucciones para Cocinas Indesit KN3E517. Indesit KN3E517 24 páginas. Cooker and oven

Imprimir página

Start-up and use

! The first time you use your appliance, heat the

empty oven with its door closed at its maximum

temperature for at least half an hour. Ensure that the

room is well ventilated before switching the oven off

and opening the oven door. The appliance may emit

a slightly unpleasant odour caused by protective

substances used during the manufacturing process

burning away.

Starting the oven

1. Select the desired cooking mode by turning the

SELECTOR knob.

2. Select the recommended temperature for the

cooking mode or the desired temperature by turning

the THERMOSTAT knob.

A list detailing cooking modes and suggested

cooking temperatures can be found in the relevant

table ( see Oven cooking advice table ).

During cooking it is always possible to:

• Change the cooking mode by turning the

SELECTOR knob.

• Change the temperature by turning the

THERMOSTAT knob.

• Set the total cooking time and the cooking end

time ( see below ).

• Stop cooking by turning the SELECTOR knob to

the "0" position.

! Never put objects directly on the bottom of the

oven; this will avoid the enamel coating being

damaged. Only use position 1 in the oven when

cooking with the rotisserie spit.

! Always place cookware on the rack(s) provided.

! Before operating the product, remove all plastic

film from the sides of the appliance.

THERMOSTAT indicator light

When this is illuminated, the oven is generating

heat. It switches off when the inside of the oven

reaches the selected temperature. At this point the

light illuminates and switches off alternately,

indicating that the thermostat is working and is

maintaining the temperature at a constant level.

Oven light

This is switched on by turning the SELECTOR knob to

any position other than "0". It remains lit as long as the

oven is operating. By selecting

light is switched on without any of the heating

elements being activated.

Timer

To activate the Timer proceed as follows:

1. Turn the TIMER knob in a clockwise direction

for almost one complete revolution to set the buzzer.

2. Turn the TIMER knob in an anticlockwise direction

to set the desired length of time.

with the knob, the