Indesit BIWDIL7125 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Lavadora/secadora Indesit BIWDIL7125. Indesit BIWDIL7125 15 páginas.
También para Indesit BIWDIL7125: Manual rápido (4 páginas)

Imprimir página

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch off and unplug the washing machine.

Do not use flammable fluids to clean the washing machine.

CLEANING THE OUTSIDE OF THE WASHING MACHINE

Use a soft damp cloth to clean the outer parts of the washing

machine.

CHECKING THE WATER SUPPLY HOSE

Check the inlet hose regularly for brittleness and cracks. If

damaged, replace it by a new hose available through our

After-Sales Service or your specialist dealer.

Depending on the hose type:

If the inlet hose has a transparent coating, periodically check

if the colour intensifies locally. If yes, the hose may have a leak

and should be replaced.

CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE

Close water tap and unscrew the inlet hose.

Clean the mesh filter at the hose's end carefully with a

fine brush.

Do not use glass or general purpose cleaners, scouring

powder or similar to clean the control panel – these

substances might damage the printing.

For water stop hoses: check the small safety valve inspection

window (see arrow). If it is red, the water stop function was

triggered, and the hose must be replaced by a new one.

For unscrewing this hose, press the release button (if

available) while unscrewing the hose.

Now unscrew the inlet hose on the back of the washing

machine by hand. Pull out the mesh filter from the valve

on the back of the washing machine with pliers and

carefully clean it.

Insert the mesh filter again. Connect the inlet hose to

water tap and washing machine again. Do not use a tool

to connect the inlet hose. Open the water tap and check

that all connections are tight.