Indesit IWDD 7123 S Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Lavadora/secadora Indesit IWDD 7123 S. Indesit IWDD 7123 S 16 páginas.

Personalisation

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).

The temperature may be lowered, or even set to a cold wash

ting a temperature which is higher than the maximum value set for each wash cycle.

Turn the DRYING knob to select the desired drying option. There are two options:

A - Based on time: From 40 minutes to 180.

B - Based on the desired laundry dryness level:

Iron dry

: suitable for clothes which will need ironing afterwards. the remaining dampness softens creases,

making them easier to remove.

Hanger dry

: ideal for clothes which do not need to be dried fully.

Cupboard dry

: suitable for laundry which can be put back in a cupboard without being ironed.

If your laundry load to be washed and dried is much greater than the maximum stated load (see Table of wash cycles), perform

the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At

this point, follow the instructions provided for a "Drying only" cycle. Repeat this procedure for the remainder of the load.

Drying only

Use the cycle selector knob to select a drying cycle (11-12) in accordance with the type of fabric. The desired drying level or

time may also be set using the DRYING knob.

The various wash functions available with this washer-dryer will help to achieve the desired results, every time.

To activate the functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.

Note:

- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash and

the function will not be activated.

-If the selected function is not compatible with another function which has been selected previously, the indicator light

corresponding to the first function selected will flash and only the second function will be activated; the indicator light

corresponding to the enabled option will remain lit.

Delay timer

To set a delayed start for the selected programme, press the corresponding button repeatedly until the required delay period

has been reached. When this option is enabled, the

press the button until the text "OFF" appears on the display.

Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled

cotton and synthetic fabrics (refer to the "Table of wash cycles"). "

water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.

1200-600

Press this button to reduce the spin speed.

. The washer-dryer will automatically prevent you from selec-

symbol lights up on the display. To remove the delayed start option

" enables you to wash in less time thereby saving