Indesit IP641SCUK Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Placa Indesit IP641SCUK. Indesit IP641SCUK 12 páginas. Hob

Maintenance and care

Disconnect your appliance from the electricity

supply before carrying out any work on it.

Do not use abrasive or corrosive detergents such

as stain removers, anti-rust products, powder

detergents or sponges with abrasive surfaces: these

may scratch the surface beyond repair.

Never use steam cleaners or pressure cleaners on

the appliance.

It is usually enough to wash the hob with a damp

sponge and dry it with absorbent kitchen roll.

The removable parts of the burners should be

washed frequently with warm water and soap and

any burnt-on substances removed.

.or hobs which ligth automatically, the terminal

part of the electronic instant lighting devices

should be cleaned frequently and the gas outlet

holes should be checked for blockages.

Stainless steel can be marked by hard water that

has been left on the surface for a long time, or by

aggressive detergents containing phosphorus.

After cleaning, rinse and dry any remaining drops

of water.

The position of the central grid may be inverted. If

this happens, the spokes will appear particularly

misaligned and the intersection point will no longer

be at the centre of the burner. There is a hole on the

grids at the side; this should be aligned with the

fixing point of the tab or hinge (if the glass cover is

fitted) located on the rear part of the hob (see

figure).

KO !

Over time, the taps may become jammed or difficult

to turn. If this happens, the tap must be replaced.

This procedure must be performed by a

qualified technician authorised by the

manufacturer.