Indesit TIL642 Manual de servicio - Página 21

Navegue en línea o descargue pdf Manual de servicio para Placa Indesit TIL642. Indesit TIL642 29 páginas. Hobs 2006

5. ASSISTANCE:

This mode makes it possible to use the touch panel normally without actually switching on the plates.

Access to Demo Mode

• To access DEMO mode press the TIMER button of plate F3, the TIMER button of plate F2 and the

ON/OFF button simultaneously and hold them down for 6 seconds. At this point the touch panel will be

activated and all the plates will be at level 0.

• When DEMO mode is active the 7-segment display will ﬂ ash the message "DE" followed by "ON" at 10

second intervals.

Quitting Demo Mode

• To quit DEMO mode, press the plate F3 TIMER button and the ON/ OFF button simultaneously. The

7-segment display will show the message "DE" followed by "OF."

5.2. FAULTS TABLE:

ERROR CODES

Service Manual

Hobs - 2006

DESIGNATION

Power board error (Communi-

cation error or main board NTC

error)

Plate NTC error (this error

is possible only on induction

Hobs)

Interface board NTC error

Edition

2006.03.13

NOTE

Communication error: the two plates

connected to the part stop working.

NTC error: the 4 plates stop working.

The plate connected to the NCT stops

working

No plates working

Language

English