AEG ARCTIS Manual de instrucciones - Página 20

Select "Freezing" or "Cooling"

If necessary, switch over the appliance with the following steps

between the operating modes "Freezing" and "Cooling":

1. Hold down the WARNING OFF button and the „-" (COLDER) button

simultaneously for 5 seconds.

• When the setting is switched from "Freezing" to "Cooling" "FC"

(Freezing -> Cooling) appears in the temperature display, an acoustic

signal confirms the change and the temperature display changes to

flashing figures (DESIRED temperature cooling mode +5 °C). Using

the temperature setting buttons, the required temperature for the

cooling mode can now be entered.

• When the setting is switched from "Cooling" to "Freezing" "CF" (Cool-

ing -> Freezing) appears in the temperature display, an acoustic sig-

nal confirms the change and the temperature display changes to

flashing figures (DESIRED temperature freezing mode -18 °C). Using

the temperature setting buttons, the required temperature for the

freezing mode can now be entered.

The operation mode, in which your appliance is at the moment, is

identifiable if the temperatures can be set above or below 0 °C.

2. Set the temperature depending upon the selected operation mode (see

the chapter "Temperature Adjustment").

Attention! If you are using the appliance as a freezing unit: Please wait

prior to putting the foodstuff to be frozen, until the freezer interior

temperature has attained -18 °C, or until the red warning display goes

off.

Attention! If you are using this appliance as a cooling unit, after it has

been used as a freezing unit: Please wait until the temperature has

reached 0 °C before putting the foodstuff to be cooled in the appliance.

1. Press either the „+" (WARMER) or „-" (COLDER) button.

The temperature display switches over and the DESIRED temperature

currently set flashes on the temperature display.

2. To adjust to a warmer temperature, press the „+" (WARMER) button. To

adjust to a colder temperature, press the „-" (COLDER) button. The

changed setting is immediately displayed on the temperature display.

818 22 13-00/2