AEG ARCTIS Manual de instrucciones - Página 25

Navegue en línea o descargue pdf Manual de instrucciones para Congelador AEG ARCTIS. AEG ARCTIS 29 páginas. Built-in fridge-freezers
También para AEG ARCTIS: Manual de instrucciones (32 páginas), Manual de instrucciones (28 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (28 páginas), Instrucciones de uso (16 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (26 páginas), Instrucciones de uso y manual de instalación (28 páginas), Manual de instrucciones (36 páginas), Manual de instrucciones (27 páginas), Manual de instrucciones (34 páginas), Manual del usuario (24 páginas), Manual de instrucciones de instalación (11 páginas), Manual de instrucciones (23 páginas), Manual de instrucciones de instalación (25 páginas), Manual de instrucciones de instalación (24 páginas)

AEG ARCTIS Manual de instrucciones

Technical terminology

• Refrigerant
Liquids that can be used to a generate a cooling effect are known as
refrigerants. They have a relatively low boiling-point, indeed so low,
that the warmth from the food stored in the fridge or freezer can
cause the refrigerant to boil and vaporise.
• Refrigerant Circuit
Closed circulation system that contains the refrigerant. The refriger-
ant circuit comprises primarily of an evaporator, a compressor, a con-
denser and pipe work.
• Evaporator
The refrigerant is evaporated in the evaporator. Similar to all other
liquids, refrigerant requires heat to evaporate. This heat is removed
from the interior of the appliance, as a result the interior is cooled.
The evaporator is therefore located inside the appliance or placed in
foam immediately behind the inner wall and thus not visible.
• Compressor
The compressor looks like a small drum. It is driven by a built-in
electric motor and is mounted on the base of the appliance at the
rear. The task of the compressor is to draw in vaporised refrigerant
from the evaporator, to compress it, and to pass it on to the con-
denser.
• Condenser
The condenser normally has the form of a grid. The refrigerant com-
pressed in the compressor is liquefied in the condenser. During this
process, heat is released to the surrounding air at the surface of the
condenser. The condenser is mounted on the base of the appliance.
48