AEG ARCTIS 75270 GA Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Congelador AEG ARCTIS 75270 GA. AEG ARCTIS 75270 GA 24 páginas. Electrolux freezer user manual

Imprimir página

Temperature setting buttons

The temperature is adjusted using the "B" and "D" buttons. These buttons

are connected to the temperature display.

• The temperature display is switched over from the display of the ACTUAL

temperature (Temperature display is illuminated) to the display of the

DESIRED temperature (Temperature display flashes) by pressing one of the

two buttons, "C" or "E".

• Each time one of the two buttons is pressed again the DESIRED

temperature is adjusted by 1 °C. The DESIRED temperature must be

reached within 24 hours.

If neither button is pressed, the temperature display automatically switches

back after a short period (approx. 5 sec.) to the display of the ACTUAL

temperature.

DESIRED temperature means:

The temperature that has been selected for inside the freezer. The DESIRED

temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the freezer.

The ACTUAL temperature is indicated with illuminated numbers.

Select "Freezing" or "Cooling"

If necessary, switch over the appliance with the following steps between the

operating modes "Freezing" and "Cooling":

Hold down the SUPER button and the "+" (WARMER) button simultaneously

for 5 seconds.

• When the setting is switched from "Freezing" to "Cooling" "FC" (Freezing -

Cooling) appears in the temperature display, an acoustic signal confirms the

change and the temperature display changes to flashing figures (DESIRED

temperature cooling mode +5 °C). Using the temperature setting buttons, the

required temperature for the cooling mode can now be entered.

• When the setting is switched from "Cooling" to "Freezing" "CF" (Cooling

- Freezing) appears in the temperature display, an acoustic signal confirms the

change and the temperature display changes to flashing figures (DESIRED

temperature freezing mode -18 °C). Using the temperature setting buttons,

the required temperature for the freezing mode can now be entered.

The operation mode, in which your appliance is at the moment, is identifiable

if the temperatures can be set above or below 0 °C.

Set the temperature depending upon the selected operation mode (see

the chapter "Temperature Adjustment").