AEG SANTO C 7 18 40-4I Instrucciones de funcionamiento e instalación - Página 26

Navegue en línea o descargue pdf Instrucciones de funcionamiento e instalación para Congelador AEG SANTO C 7 18 40-4I. AEG SANTO C 7 18 40-4I 32 páginas. Integrating fridge freezer
También para AEG SANTO C 7 18 40-4I: Instrucciones de uso e instalación (15 páginas), Instrucciones de uso e instalación (28 páginas), Instrucciones de uso e instalación (24 páginas), Instrucciones de uso e instalación (25 páginas), Instrucciones de uso e instalación (28 páginas), Instrucciones de uso e instalación (32 páginas), Instrucciones de uso e instalación (28 páginas), Instrucciones de uso e instalación (14 páginas), Manual del usuario (44 páginas)

Imprimir página
AEG SANTO C 7 18 40-4I Instrucciones de funcionamiento e instalación

What to do if ...

Correcting Malfunctions

If the appliance is not functioning correctly, please carry out the following
checks before contacting your local AEG Service Force Centre.
Warning!
Repairs should only be carried out by qualified service engineers. Repairs
carried out by inexperienced persons may cause injury or serious malfunc-
tioning of the appliance.
Symptom
Appliance does not work.
Appliance cools too much.
The refrigerator and/or
freezer compartment tem-
perature is insufficient.
Interior lighting does not
work.
The compressor does not
start immediately
pressing the TURBO COOL-
MATIC button, or
changing the temperature
setting.
26
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged
in or is loose.
Fuse has blown or is
defective
Socket is defective.
Temperature is set too
cold.
Temperature is not proper-
ly adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The appliance is near a
heat source.
Light bulb is defective.
after
This is normal, no error has
after
occurred.
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an electri-
cian.
Press "+" (WARMER) but-
ton.
Please look in the "Starting
up and Temperatur regula-
tion" section.
Open the door only as long
as necessary.
Press TURBO COOLMATIC
button.
Please look in the "Installa-
tion location" section.
Please look in the "Changing
the light bulb" section.
The compressor starts after
a period of time.