AEG 2460 D Instrucciones de uso e instalación - Página 8
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación AEG 2460 D. AEG 2460 D 18 páginas. Electrolux cooker hood operating and installation instructions 2460 d
También para AEG 2460 D: Instrucciones de uso e instalación (20 páginas)
Imprimir página
Carbon filter
• The carbon filter should only be used if you want to use the hood in
its filtering function.
• To do this you will need an original AEG activated carbon filter (see
special accessories).
• Cleaning/replacing the carbon filter
Unlike other carbon filters, the LONGLIFE carbon filter can be
cleaned and reactivated. At normal use the filter should be cleaned
every second month. The best way to clean the filter is in the
dishwasher. Use normal detergent and choose the highest tempera-
ture (65º C). Wash the filter separately so that no food parts gets
stuck on the filter and later causes bad odours. To reactivate the
carbon, the filter should be dried in an oven for 10 minutes with a
temperature of maximum 100º C.
After approximately three years of use, the carbon filter should be
replaced with a new, as the odour reduction capacity will be
reduced.
• Mounting
Remove the frame b which supports the filter c by unscrewing it
from the hood a, Fig. 4.
Insert the coal mattress inside the frame and put all parts back in
their place.
• To dismount proceed in reverse order.
• Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on the
registration plate located on the inside of the unit.
• The activated carbon filter can be ordered from the AEG technical
assistance service.
54
Fig. 4