AEG 8160 D Instrucciones de uso e instalación - Página 3

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación AEG 8160 D. AEG 8160 D 16 páginas. Cooker hood
También para AEG 8160 D: Instrucciones de uso e instalación (20 páginas), Instrucciones de uso e instalación (18 páginas), Manual de funcionamiento e instalación (16 páginas)

Use of the cooker hood

This appliance is for domestic use only in a normal household.

Never leave any deep-frying, melting fat, paraffin or any other

inflammable liquid unattended on the hob. In the event of fire:

Immediately switch off the cooker hood and the cooker. Note! Cover

the fire. Never use water.

Never do any flambé cooking underneath the cooker hood. It can cause

a fire. Remember that overheated fat may spontaneously ignite. Never

leave the frying pan unattended.

It is essential that the grease filter is regularly cleaned to help avoid fat

dripping on to the hot zone and causing a fire. Read the section on

"Maintenance and Cleaning" in the instruction book.

Disposal

Prevent accidents when disposing of your cooker hood. Disconnect the

power plug from the wall socket and cut the power cord at the hood

inlet. Contact your local authority for information on where to dispose of

the cooker hood.

Description of the cooker hood

Functions

There are two possible systems:

Extraction of air to the outside using an

optional venting kit and evacuation

duct.

Recirculation using an optional carbon

filter.

Accessories

The following are included with the cooker hood.

1 Adaptor 150-125 mm

2 Tube clamps

1 hood canopy complete with controls, lighting and fan motor.

1 telescopic chimney stack formed by: U-shaped upper section and U-

shaped lower section.

1 reduction flange Ø 150-125 mm.

1 recirculation spigot.

1 plastic bag containing: 2 wall hooks to fix the canopy hood, 1 wall

bracket to fix the chimney, rawl plugs, screws, and documentation.

The following can be ordered from your retailer:

Carbon, KF8 filter, alternatively KFL 60/80.The carbon filter is to be used

when the hood is connected to the recirculation mode.

Fig. 1