AEG CHDE3160-ML Instrucciones de uso e instalación - Página 15

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Campana de ventilación AEG CHDE3160-ML. AEG CHDE3160-ML 19 páginas.

Installing the hood between cupboards with

hanging rails

• Remove the grease filters. Fig. 6.

• Take off the visor G. Fig. 13.

• Mount the two hanging rails directly underneath the edge of

the cupboard using three screws 4,5 x 16 mm in each rail.

Distance from first hole to front edge of the cupboards sides

must be 153 mm. Fig. 8.

• Push the extractor hood over the two hanging rails, then fix the hood

from its inside to the cupboards sides with two screws (4,5 x 13)

through the lower holes of the hood. Fig. 9.

• Refit the visor. Fig. 13.

• Refit the grease filters.

• Fit the spacer M on the hood with two screws O and washers,

ensure that there is not a gap between the back of the hood and the

wall by adjusting the spacer M tightly to the wall, using the screws

O. Fig. 11.

153

Fig. 8

Fig. 9