AEG CHDF 6260 Manual de funcionamiento e instalación - Página 9

Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Campana de ventilación AEG CHDF 6260. AEG CHDF 6260 22 páginas. Electrolux cooktop user manual
También para AEG CHDF 6260: Instrucciones de uso e instalación (21 páginas), Instrucciones de uso e instalación (21 páginas), Manual de funcionamiento e instalación (21 páginas), Instrucciones de uso e instalación (23 páginas), Instrucciones de uso e instalación (22 páginas)

Charcoal filter

• The charcoal filter should only be used if you want to use the hood in

its filtering function.

• To do this you will need an original AEG charcoal filter (see special

accessories).

• Replacing the charcoal filter

The charcoal filter must normally be replaced at least once every

year. This filter cannot be washed or regenerated.

To guarantee proper absorption of odours the working volume of the

charcoal must be proportionate to the hood air flow. In this case the

high quality of the charcoal will ensure efficient odour removal for

approximately one year, assuming that the hood is used normally.

For this reason you should always use original AEG filters only,

making sure they are replaced when necessary.

• Mounting

1. Pull out the vapour catcher (A).

2. Remove first the rear then the front grease filters.

3. Insert the charcoal filter into the lugs of the holding frame above

using the 2 red clips to retain it below, press the red clips inwards,

and insert the charcoal filter in the holding frame. Fig. 3.

• Dismounting:

1. Press both red lugs upwards (towards the inside of the housing)

and remove the charcoal filter downwards.

2. Clean the internal housing only with warm washing-up liquid' suds

(never use any abrasive cleaners, brushes, or scouring agents).

• Always specify the hood model code number and serial number

when ordering replacement filters. This information is shown on the

registration plate located on the inside of the unit.

• The charcoal filter can be ordered from the AEG technical assistance

service.

Fig. 3