Kohler URBANITY 23748T-9 Instrucciones de instalación

Navegue en línea o descargue pdf Instrucciones de instalación para Productos de fontanería Kohler URBANITY 23748T-9. Kohler URBANITY 23748T-9 4 páginas. Wall mount thermostatic bath & shower faucet, wall mount thermostatic shower only faucet

Imprimir página

SERVICE PARTS

23750T-9

Wall Mount Thermostatic Shower Only Faucet

1348571**

1299824

870992

831752

871472

1259076

1299825

3019692

1391738

870721

864922**

1347562

834638

1248781**

**Color code must be specified when ordering.

NOTE: For all Asia pacific regions (excluding China) add SP (SPxxxxxxx**) in front of the part number when ordering.

1387023-2A-A

URBANITY

1286913

77420

1299843**

1176766

1242354

1299846

1299857

1242353

1299837

3008304

834404

1244920

1299821

1391739

1299838

1299839**

1258634**

1337971**

1061576

1337970**

23096

1081607

INSTALLATION INSTRUCTIONS

23748T-9

23750T-9

BEFORE YOU BEGIN

All information is based on the latest product information available at the time of publication. Kohler Co. reserves the right

to make changes in product characteristics, packaging, or availability at any time without notice.

Please leave these instructions for the consumer. They contain important information.

OPERATION CONDITION

1. Minimum supply pressures: 0.1MPa(1bar).

2. Recommended supply static pressures: 0.3MPa(3bar) on hot and cold water.

3. Supply pressure greater than 0.5MPa(5bar): install a pressure reducer.

4. Hot water temperatures, minimum: 50ºC, maximum: 80ºC.

5. Recommended hot water temperature: 65ºC(energy-saving).

6. Setting range, approximately: 20ºC to 49ºC.

7. Safety stop at: 37ºC.

8. Maximum mixed water temperature: 49ºC.

9. The highest environment temperature for handshower & showerhead is 60ºC. Please keep handshower, showerhead

and shower arm away from heater, or it may become damaged and cause injury to the user.

833438

OPERATION INSTRUCTIONS

3008523

833730

The temperature is set by slowly turning the temperature handle(right-hand handle). For safety reasons, there is a stop

that limits temperature to 37ºC. To get a higher temperature, push the button(on right-handle) and continue turning the

temperature handle counter-clockwise.

Water flow and dispense is set by switch buttons. Press any switch button on the faucet body, the water will run from

corresponding outlet. Rotate the switch buttons counter-clockwise to reduce flow.

STANDARD APPLICABLE

Special model meets or exceeds the following at date of manufacture: TIS

TOOLS AND MATERIALS (USER SUPPLIED)

Adjustable Wrench

1387023-2A-A

Wall Mount Thermostatic Bath & Shower Faucet

Wall Mount Thermostatic Shower Only Faucet

Icon description above

switch button

Handshower

Level

Drill

Pencil

URBANITY

Bath spout

(For 23748T)

Screwdrivers

Sealant Tape