Kohler BELAY K-156T-LCP Manual de instrucciones de instalación - Página 18

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Sanitarios Kohler BELAY K-156T-LCP. Kohler BELAY K-156T-LCP 23 páginas.

CARE AND CLEANING

For best results, keep the following in mind when caring

for your KOHLER bath:

Always test your cleaning solution on an

inconspicuous area before applying to the entire

surface.

Wipe surfaces clean and rinse completely with water

immediately after applying cleaner. Rinse and dry

any overspray that lands on nearby surfaces.

Do not allow cleaners to soak on surfaces.

Use a soft, dampened sponge or cloth. Never use

an abrasive material such as a brush or scouring

pad to clean surfaces.

The ideal cleaning technique is to rinse thoroughly

and blot dry any water from the surface after each

use.

Use a soft nylon brush on slip-resistant surfaces. Be

sure to use a water-soluble cleaner (dissolves 100%

in water).

Do not use powdered cleaners unless the cleaner is

fully dissolved in water. Solid substances can block

the airjets.

Do not use full strength bleach or ammonia cleaning

solutions. Chemically active cleaning solutions can

damage the surface.

Do not use abrasive cleansers or solvents on airjet

surfaces. Abrasive cleaners and solvents can

damage the airjet surface.

Maintaining the Airjets

If cleaning the airjets is necessary due to hard water

deposits, wet a soft, non-abrasive cloth with white

vinegar and wipe the plugged airjet holes.

Immediately rinse the area with clean water to avoid

long-term exposure of the vinegar to the airjet

surface.

Fill the bath with water to the top row of airjets.

Drain the bath, and press the air system button to

purge retained water from the air system. Press the

air switch button three more times to turn off the air

system.

1397340-T01-A

-18-

100%