Kohler Elosis 18077T-B-CP Manual de instrucciones de instalación
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Sanitarios Kohler Elosis 18077T-B-CP. Kohler Elosis 18077T-B-CP 12 páginas. Sensor faucet
Imprimir página
18055T-B-CP 黛诗台盆感应龙头-直流电(冷热混合型)
18057T-B-CP 黛诗台盆感应龙头-直流电(单冷型)
18075T-B-CP 黛诗台盆感应龙头-交流电(冷热混合型含交流电源盒)
18076T-B-CP 黛诗台盆感应龙头-交流电(冷热混合型)
18077T-B-CP 黛诗台盆感应龙头- 交流 电(单冷型含交流电源盒)
18078T-B-CP 黛诗台盆感应龙头-交流电(单冷型)
安装之前
所有的资料是按最新出版的产品资料编写而成。
科勒公司保留任何时候不经通知即可改变产品特
性、包装或产品可供类型的权利。
说明书包括重要的安装、保养及清洁方面的内容，
请把这些资料交给用户阅读。
注意事项:
1. 一定要先彻底冲洗供水管以清除管道中的杂质,
使用水源为自来水或可供饮用水。
2. 请勿将强力及冲击施于产品，以免造成故障，
引起漏水。
3. 安装、清洁龙头时，切勿损伤感应窗口表面，
以免造成故障。
4. 如果是安装新的洗面盆，可将水龙头和排水组
件先安装好到面盆上。
5. 对于直流龙头，安装时注意电池的正负极不能
装反，电池盒盖要拧紧，防止电池受潮。
6. 对于交流龙头，安装时务必按照说明书的要求
正确连接导线，龙头安装完毕后才可向电源盒供
电。
7. 一个交流电源盒最多可供两个感应龙头。
8. 交流电的总电源必须有合适熔断丝加以保护。
9. 请勿使产品感应窗口靠近强紫外线或电磁场。
10. 为保证龙头正常工作，请务必安装连接组件。
11. 对于冷热混水龙头，先将连接热水的角阀关
闭，以免烫伤。
12. 修理面盆时，用黑色电工胶布粘住感应窗口。
1248536-T01-C
科勒（中国）投资有限公司
制造商：上海科勒电子科技有限公司
中国上海宝山区丰翔路1955号 邮编：200444
Kohler China Investment Co.,Ltd
Manufacturer:Shanghai Kohler Electronic Technology Co., Ltd.
No.1955, Fengxiang Road. Baoshan Area, Shanghai, PRC Post code: 200444
Elosis Sensor Faucet
BEFORE YOU BEGIN
All information is based on the latest product information
available at the time of publication, Kohler Co. reserves the
right to make changes in product characteristics, packaging,
or availability at any time without notice. Please deliver these
instructions for the consumer. They contain important
installation, maintenance and cleaning information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
Faucet is designed for tap water or potable water.
2. Do not attack the faucet with rough strength to avoid being
damaged.
3. Do not damage the surface of sensing window when
installing or cleaning the faucet.
4. For new installations, install the faucet and drain to the
lavatory before installing the lavatory.
5. As for DC type faucets, please pay special attention to
insert direction matches battery poles. Tighten the battery
cover completely to prevent its exposure to moisture.
6. As for AC type faucets, strictly follow indicated instructions
to perform electric connection. Only provide electric supply
to power box after the installation is completed.
7. One AC/DC transformer for max.two faucets.
8. Electrical source must equipped with suitable fuse to
protect AC/DC transformer unit from damage.
9. Do not put the faucet near strong ultraviolet or
electromagnetic field.
10.To ensure faucet proper operation, please install
connectors.
11. For faucet with temperature mixer, please turn off valve
before connecting to hot water to avoid scalding.
12. Cover the sensing window with black tape when
repairing lavatories.
1