Academia Furniture SCTL-2460 Instrucciones de montaje

Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior Academia Furniture SCTL-2460. Academia Furniture SCTL-2460 2 páginas. Double study carrel

Imprimir página

liST oF pArTS

Part

drawing

description

60x24 table top

17x21 Partition

10x29 shelf

17x60 Back Piece

upper Leg

Leg insert

stretcher Bar

HArdwAre liST

Part

drawing

description

Bolt

nut

Washer

Wrench

upper Leg screws 8

Leg insert screws 6

Glide

2" screws

2 ½" screws

w w w. A c a d e m i a F u r n i t u r e . c o m

Qty

To ASSeMble:

We suggest that 2 people assemble

this Carrel. The assembly for this carrel

is quick and extremely easy, thanks to

our dowel pin method.

1. identify and separate all the parts and hardware.

Qty

2. Place the 60x24 table top [P1] upside down on a flat

surface. Attach the [P5] upper legs with the [P7] stretcher bar.

First line up the holes of the upper leg with the 2 holes

in the stretcher bar's bracket, as shown in illustration #1.

insert the [A] bolt from the outside of the leg and place the [c] washer and

[B] nut inside, once the bolt is through the leg. tighten the [B] nut. repeat on

the other side.

3. Properly align the upper leg bracket in the center of the table's width. there

are locator marks for assembly ease. use 4 [e] screws to attach each upper leg

to the underside of the table top. See illustration #1

4. install the [P6] leg inserts into the [P5] upper legs, as shown in illustration

#1. the holes in the legs are 1" apart. set at desired height and tighten

using 3 [F] screws per leg. screw the [G] glide on the bottom of the t-legs.

double STudy CArrel – ASSeMbly inSTruCTionS

Model #SCTl-2460

IllustrAtIon #1