Kohler K-1257 Manual de puesta a punto - Página 2

Navegue en línea o descargue pdf Manual de puesta a punto para Sanitarios Kohler K-1257. Kohler K-1257 4 páginas. Bath whirlpool
También para Kohler K-1257: Manual del propietario (32 páginas), Manual del propietario (29 páginas), Manual de instalación (48 páginas), Manual del propietario (36 páginas), Manual del propietario (32 páginas), Manual de instalación (48 páginas), Manual de puesta a punto (4 páginas), Manual de instalación (48 páginas), Manual de puesta a punto (4 páginas), Manual de instalación (44 páginas), Manual de instalación (48 páginas), Manual de instalación (44 páginas), Manual del propietario (29 páginas), Manual de puesta a punto (4 páginas), Manual de instalación (48 páginas)

Kohler K-1257 Manual de puesta a punto
7-1/2"
(19.1 cm)
18"
(45.7 cm)
1-13/16"
10-1/4" (26 cm)
(4.6 cm)
3-1/2"
(8.9 cm)
3"
(7.6 cm)
Product Information
Applicable product:
Drop in rim style, custom pump location
Fixture:*
Bathing well:
Basin area, bottom
50" (127 cm) x 24" (61 cm)
Basin area, top
65" (165.1 cm) x 27" (68.6 cm)
Weight
115 lbs (52 kg)
To overflow:
Water depth
14" (35.6 cm)
Capacity
72 gal (272.5 L)
* Approximate measurements for comparison only.
Drop-in cut-out
70" (177.8 cm) x 34" (86.4 cm)
Pump:
1-speed
Heater
1.5 kW
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
Locate the outlets behind the whirlpool and within 24" (61 cm)
of the pump.
1012658-1-C
K-1257-HB
Pump/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H Min
72" (182.9 cm)
2-7/8"
1" (2.5 cm)
(7.3 cm)
K-1257-HB
V
Hz
A
120
60
7.5
120
60
12.5
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
No change in measurements with drain
shown. (K-7166-AF or K-7166M-AF)
Recommended faucet area.
36" (91.4 cm)
20"
18-1/2"
(50.8 cm)
(47 cm)
1-1/2" OD
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
41 lbs/square foot (199.6 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
A minimum access panel is required as illustrated. This should be
20" (50.8 cm) wide and 15" (38.1 cm) high. Locate the access panel
at the pump location.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In
Rim Detail
Kohler Co.