Kohler K-1283 Manual de instalación - Página 3

Navegue en línea o descargue pdf Manual de instalación para Sanitarios Kohler K-1283. Kohler K-1283 17 páginas. Removable bath/ whirlpool aprons
También para Kohler K-1283: Manual de instalación (12 páginas), Manual de instrucciones de instalación (12 páginas)

Imprimir página

Support Structure

1. Prepare the Site

NOTICE: An additional support structure is required. To avoid fatigue cracking to the bath/whirlpool

deck, construct a support structure under the entire front edge of the bath/whirlpool deck. Refer to the

illustration as an example.

NOTICE: Do not use the additional support structure to carry the load of the bath/whirlpool. The

bath/whirlpool must be supported by its feet.

If you have not already done so, prepare the site for the bath/whirlpool. Refer to the installation

instructions and rough-in packed with your bath/whirlpool.

NOTICE: Ensure the support structure does not interfere with the whirlpool harness (if applicable), apron

adjustment, plumbing lines, and faucet mounting.

Secure two studs vertically at the front corners of the bath/bath whirlpool and at spaced intervals

in-between.

Secure a stud horizontally across the vertical studs.

Apply construction adhesive to the horizontal stud.

Set the bath/whirlpool in place, affixing the underside of the bath/whirlpool deck to the horizontal

studs.

Complete the bath/whirlpool installation at this time. Refer to the installation instructions packed

with your bath/whirlpool.

Kohler Co.

Apron

Bath

Support Structure

1018323-2-C