AEG LAVATHERM 59840 Manual del usuario - Página 36
Navegue en línea o descargue pdf Manual del usuario para Secadora AEG LAVATHERM 59840. AEG LAVATHERM 59840 48 páginas. Condenser dryer with heat pump
Imprimir página
36
Installation
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken
from the type plate. The type plate is fitted near the loading aperture (see "Product
description" chapter).
Connect the machine to an earthed socket, in accordance with current wiring
regulations.
WARNING!
The manufacturer declines any responsibility for damage or injury through
failure to comply with the above safety precautions.
Should the appliance power supply cable need to be replaced, this must be
carried out by our Service Center.
The appliance is supplied with a 13 amp plug fitted. In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA approved BS 1363/A fuse must be
used.
The wire coloured green and yellow must be
4
connected to the terminal marked with the
letter «E» or by the earth symbol
or col-
oured green and yellow.
The wire coloured blue must be connected to
the terminal «N» or coloured black.
The wire coloured brown must be connected
3
to the terminal marked «L» or coloured red.
1
Upon completion there must be no cut, or
2
stray strands of wire present and the cord
clamp must be secure over the outer sheath.
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock)
hazard.
Ensure that the cut off plug is disposed of safely.
WARNING!
The power supply cable must be accessible after installing the machine.