AEG LAVATHERM 8040 TW ELECTRONIC Información para el usuario - Página 14

Navegue en línea o descargue pdf Información para el usuario para Secadora AEG LAVATHERM 8040 TW ELECTRONIC. AEG LAVATHERM 8040 TW ELECTRONIC 32 páginas. Condenser dryer with heat pump

Imprimir página

1. Cleaning and Maintenance

Setting time delay

With the DELAY TIMER (ZEITVORWAHL) button, you can delay the start

of a programme by between 30 minutes (30' and a maximum of 23

hours (23h).

1. Select the programme

2. Press the DELAY TIMER (ZEITVORWAHL) button as many times as neces-

sary until the required start delay appears on the multi display, e.g. 12h

if the programme is to be started in 12 hours. The DELAY TIMER

(ZEITVORWAHL) display is illuminated.

If 23h is displayed and you press the button again, the time delay will

be cancelled. The display will show 0' and then the duration of the se-

lected programme.

3. To activate the delay timer, press the START/PAUSE button. The amount

of time remaining until the programme is set to start is continuously

displayed (e.g. 12h, 11h, 10h, ... 30

Until the start of the programme the drum is moved at longish intervals

to loosen the laundry.

Starting the programme

Press the START/PAUSE button. The programme is started.

The programme progress display and the display showing the level of

dryness show drying progress.

Changing programme

To change a programme which has been selected by mistake once the

programme has started, first turn the programme selector to OFF (AUS)

and then reset the programme.

The programme can no longer be changed directly once the programme

has started. If nevertheless there is an attempt to change the pro-

gramme on the programme knob, the programme progress display and

the maintenance indicators flash. If an option button (excluding the

AUDIBLE SIGNAL (SIGNAL button) is pressed, Err appears in the multi-

display. The drying programme is not however affected by this (laundry

protection).

etc).