AEG TR7C40588 Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Secadora AEG TR7C40588. AEG TR7C40588 28 páginas.

3. Gather lint with hand from both internal

parts of the filter.

Throw the lint in the dustbin.

4. If necessary, clean the filter with a

vacuum cleaner. Close the filter.

5. If necessary, remove lint from the filter

socket and gasket. You can use a

vacuum cleaner. Place the filter back

inside the filter socket.

10.2 Emptying the water container

Empty the condensed water container after

each drying cycle.

If the condensed water container is full, the

programme stops automatically. The

Behälter symbol comes on the display and

you must empty the water container.

To empty the water container:

1. Pull the water container out keeping it in a

horizontal position.

2. Pull the plastic connection out and drain

the water into a basin or equivalent

receptacle.

3. Push the plastic connection back in and

place the water container back into

position.

4. To continue the programme press the

Start/Pause button.

10.3 Cleaning the condenser

Kondensator flashes on the

If the symbol

display, inspect the condenser and its

compartment. If it is dirty, clean it. Do the

check not less than once a 6 months.

WARNING!

Do not touch the metal surface with bare

hands. Risk of injury. Wear protective

gloves. Clean carefully to avoid

damaging the metal surface.

To inspect:

ENGLISH