AEG TR938H2C Manual del usuario - Página 21
Navegue en línea o descargue pdf Manual del usuario para Secadora AEG TR938H2C. AEG TR938H2C 36 páginas.
Imprimir página
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available
programmes.
10. CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the
symbol comes on the display and you
must clean the filter.
The filter collects the lint
during the drying cycle.
To achieve the best drying
performances clean the filter
regularly , clogged filter lead
to longer cycles and energy
consumption increase.
Use your hand to clean the
filter , and if necessary , a
vacuum cleaner .
CAUTION!
Avoid the use of water to
clean the filter. Instead throw
away lint in the dustbin
( avoid dispersion of plastic
fiber in water ambient).
1. Open the door. Pull the filter up.
3. Touch and hold down Tichý and
Osvěžení buttons at the same time.
One of 2 configurations is possible:
• the nádržka indicator:
• the nádržka indicator:
2. Push the hook to open the filter.
filtr
3. Gather lint with hand from both
internal parts of the filter.
Throw the lint in the dustbin.
4. If necessary, clean the filter with a
vacuum cleaner. Close the filter.
5. If necessary, remove lint from the
filter socket and gasket. You can use
a vacuum cleaner. Place the filter
back inside the filter socket.
the symbol
water container indicator is
permanently activated
the symbol
water container indicator is
permanently deactivated
ENGLISH
21
is on if
appears - the
is off if
appears - the