AEG TR959M7SC Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Secadora AEG TR959M7SC. AEG TR959M7SC 40 páginas.
Imprimir página
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device or scan QR code (
"QR code on rating plate" ).
2. Download and install App My AEG
Care.
3. Make sure you started a Wi-fi
connection in the dryer. If not go to
the section below.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in My
AEG Care.
5.3 Wireless connection
configuration
Before you begin the configuration
download and install My AEG Care
application on your smart device.
1. Push the On/Off button to switch on
the appliance.
2. Wait approximately 8 seconds.
3. Press and hold the Remote Start
button for around 3 seconds until you
hear a single 'click' sound.
The symbols:
and
display. After few seconds only flashing
symbol:
remains. Appliance is
starting up the connection, it takes
around 10 second for the wireless
module to activate. When ready the
symbol:
(Access Point) appears on
the display. Access Point is open for
around 3 minutes.
4. Configure the My AEG Care app on
your smart device and follow the on
screen instructions to connect the
appliance to your WiFi network.
5. If the connection is established,
symbol is off and the
stays lit steadily.
see chapter
To switch off the wireless connection,
touch and hold down Remote Start
button until you hear a single 'click'
sound. The symbol:
the display.
To remove the wireless credentials,
touch and hold down Remote Start
button for around 10 seconds until you
hear 2 'beeps' sound. The symbol:
5.4
appear on the
WiFi icon
The Remote Start enables you to start a
cycle in remote control.
Each time you switch the
appliance on, the appliance
attempt to connect to the
network automatically. When
the connection is established
the symbol:
stops
flashing.
appears on
Appliance stores last
connection configuration. To
use wireless features of the
appliance the wireless
connection must be in
mode.
appears on the display.
Remote Start
My AEG Care allows you to
control your laundry through
a mobile device.
It contains a large number of
programmes, useful features
and product information
tailored perfectly to the
appliance.
Through the app you can
select the programmes
already available from the
appliance control panel, plus
unlock additional
programmes available only
from a mobile device.
Additional programmes can
change over the time along
with new versions of the
app.
It's personalized laundry
care - all from your mobile
device.
ENGLISH
13