Kohler STERLING 76161120 Manual del propietario - Página 4

Navegue en línea o descargue pdf Manual del propietario para Sanitarios Kohler STERLING 76161120. Kohler STERLING 76161120 29 páginas. Whirlpool bath

Fill with water 2" (5.1 cm)

above the highest jet.

Turn the large jet

trim ring clockwise

to decrease the

flow.

Operating Your Whirlpool

NOTE: The jet nozzles can be adjusted for ﬂow. Turn the jet trim rings clockwise to reduce the ﬂow or

counterclockwise to increase the ﬂow.

Position all jet nozzles so they face down toward the basin.

Turn the jet trim rings fully counterclockwise.

Close the drain, then ﬁll the whirlpool to at least 2" (5.1 cm) above the top of the highest jet.

Use your hand to test the water temperature for comfort and safety, then carefully enter the bath

basin.

Press the air switch to turn on the whirlpool.

Adjust the jets for optimum air/water mixture.

Position the jet nozzles to direct the water ﬂow as desired to maximize your hydro-massage

experience.

Press the air switch a second time to deactivate the airjets.

Carefully exit the bath, and open the drain to empty the whirlpool.

NOTE: If the whirlpool does not function properly, please refer to the "Troubleshooting" section.

Care and Cleaning

Cleaning Your Vikrell Whirlpool

For best results, keep the following in mind when caring for your STERLING product:

Always test your cleaning solution on an inconspicuous area before applying to the entire surface.

Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and

dry overspray that lands on nearby surfaces.

Do not allow cleaners to sit or soak.

Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring

pad to clean surfaces.

For detailed cleaning information and products to consider, visit www.sterlingplumbing.com/support.html.

To order Care & Cleaning information, call 1-800-456-4537.

Flushing Your Whirlpool System

Flush your whirlpool system twice a month or more, depending upon usage.

1016905-5-L

Position the jet nozzles

to direct the water flow

as desired.

Turn the large jet trim

ring counterclockwise

to increase the flow.

Press the air actuator to turn

the whirlpool on or off.

Sterling