Kohler 513439 Planificación detallada Dimensiones - Página 2
Navegue en línea o descargue pdf Planificación detallada Dimensiones para Bañeras Kohler 513439. Kohler 513439 2 páginas. Drop-in vibracoustic bath
Imprimir página
Required Electrical Service
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Amplifier:
120 V, 15 A, 50/60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Drop-in, Under-mount
Drain location:
Center
Basin area, bottom:
39-3/8" x 39-3/8" (1000 mm x 1000 mm)
Basin area, top:
44-5/8" x 44-5/8" (1133 mm x 1133 mm)
Weight:
115 lbs (52.2 kg)
Minimum floor load:
99 lbs/ft² (483.4 kg/m²)
Water depth:
27-1/2" (699 mm)
Water capacity:
171 gal (647.3 L)
Cutout:
Drop-in, 47" x 47" (1194 mm x 1194 mm)
Electrical component
Amplifier: 120 V, 1.1 A, 50/60 Hz
rating:
Amplifier channels:
2 at 15 W per channel
2 at 30 W per channel
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-3-2017 02:33
*Recommended User
Underscore Cube
Drop-In VibrAcoustic Bath
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Kit is required for under-mount installations (sold
separately).
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
K-1969-VB