Kohler Archer K-1124-RA-0 Manual del propietario - Página 2

Navegue en línea o descargue pdf Manual del propietario para Bañeras Kohler Archer K-1124-RA-0. Kohler Archer K-1124-RA-0 24 páginas. Bath whirlpools

Operating Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE,

ELECTRICAL SHOCK, OR INJURY TO PERSONS

READ AND FOLLOW ALL INSTRUCTIONS

WARNING: When using electrical products, basic precautions should always be followed,

including the following:

DANGER: Risk of personal injury. To reduce the risk of injury, do not permit children to use this

unit unless they are closely supervised at all times.

WARNING: Risk of personal injury. To avoid injury, exercise care when entering or exiting the

whirlpool.

WARNING: Risk of electric shock. Do not permit electric appliances (such as a hair dryer, lamp,

telephone, radio, or television) within 5' (1.5 m) of this whirlpool.

WARNING: Risk of hyperthermia. People using medications and/or having an adverse medical

history should consult a physician before using a whirlpool equipped with a heater.

Use this whirlpool only for its intended purpose as described in this manual. Do not use attachments not

recommended by the manufacturer.

Never drop or insert any object into any opening. Keep small objects such as bath toys and bathing

accessories out of the whirlpool while the unit is running.

Do not operate this unit without the guard (cover) over the suction ﬁtting.

The whirlpool must be connected only to a supply circuit that is protected by a Ground-Fault

Circuit-Interrupter (GFCI) or Residual Current Device (RCD). Such a GFCI or RCD should be provided by

the installer and should be tested on a routine basis. To test the GFCI or RCD, press the test button. The

GFCI or RCD should interrupt power. Press the reset button. Power should be restored. If the GFCI or RCD

fails to operate in this manner, the GFCI or RCD is defective. If the GFCI or RCD interrupts power to the

bath without the test button being pressed, a ground current is ﬂowing, indicating the possibility of an

electric shock. Do not use this whirlpool bath. Disconnect the whirlpool and have the problem corrected by a

qualiﬁed service representative before using.

NOTE: If the pump supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualiﬁed persons in order to avoid a hazard. The heater supply cord cannot be replaced. If the

cord is damaged the heater should be scrapped.

WARNING: The use of alcohol, drugs, or medication can greatly increase the risk of fatal

hyperthermia. Prolonged immersion in hot water may induce hyperthermia. Hyperthermia occurs

when the internal temperature of the body reaches a level several degrees above the normal body

temperature of 98.6°F (37°C). The symptoms of hyperthermia include an increase in the internal

temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of hyperthermia

include: (a) failure to perceive heat, (b) failure to recognize the need to exit the bath, (c)

unawareness of impending hazard, (d) fetal damage in pregnant women, (e) physical inability to

exit the bath, and (f) unconsciousness resulting in the danger of drowning.

NOTE: Flush your whirlpool system twice a month or more depending upon usage, as described in the

"Flush System" section in this manual.

Do not allow the water temperature in the whirlpool to exceed 104°F (40°C).

Repeated use of personal care products containing oils can damage plastic whirlpool components. Do not use

heavy, vegetable-based shampoos or bath oils.

1421656-5-A

SAVE THESE INSTRUCTIONS

Kohler Co.