Kohler Hourglass 30 K-1201 Manual de instrucciones de instalación - Página 19
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Bañeras Kohler Hourglass 30 K-1201. Kohler Hourglass 30 K-1201 20 páginas.
Imprimir página
B. OPERATING SEQUENCE
Refer to the chart at right for the proper operating
sequence.
1.
Turn on the whirlpool jets. Adjust each jet for
optimum air/water mixture.
2.
A built-in timer automatically stops the motor after
approximately 20 minutes of operation.
18. TROUBLESHOOTING PROCEDURES
A. FLEXJET INSTALLATION
NOTE: The Flexjet O-ring must be correctly positioned,
must be lubricated, and must be in good condition to
permit easy rotation and proper operation.
1.
Install the O-ring onto the first shoulder of the
Flexjet. Lubricate the O-ring with silicone lubricant
to prevent noisy operation of the Flexjet.
2.
Insert the Flexjet into the housing, and lightly push
and rotate the Flexjet until it snaps into position. Do
not force the Flexjet.
NOTE: When installed correctly, the Flexjet should turn
smoothly both clockwise and counterclockwise.
Kohler Co., Kohler WI
TO
Turn on the
whirlpool
massage.
To add air and
water to the
Reduce
whirlpool action,
Air
rotate trim ring
counterclockwise.
To reduce air and
water, turn it
clockwise.
Shut off whirlpool.
Restart whirlpool
after 20 minute
cycle is
complete.
Flexjet Housing
O-Ring (Must
Be Lubricated)
19
METHOD
OBSERVE
Add
Air
Slide O-Ring
Flexjet
EA
113867-2-
(-)