Kohler ADAIR K-8759T Manual de instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Aseos Kohler ADAIR K-8759T. Kohler ADAIR K-8759T 10 páginas.

Imprimir página

NOTES

Observe all local plumbing and building codes.

Shut off the water supply.

Seat post holes are on 140mm centers.

Ensure that the new drain has the correct roughing-in

dimension. This toilet has a 305/400mm roughing-in

dimension.

See Roughing-in

Closet flange must be 305/400mm on-center from wall.

Carefully inspect the new fixture for any sign of damage.

For new construction, refer to the dimensions in

installation step

for locating the shut-off valve.

Fixture dimensions are nominal and conform to tolerances

established by ASME Standards (A112.19.2-2013).

The product complies with GB 6952-2015.

WARNING: Risk of personal injury or product

damage

: Handle vitreous china products very carefully.

Vitreous china can break and chip if you overtighten

bolts and nuts.

WARNING: Risk of external leakage

nut has been factory-tightened to design specifications.

If re-tightening is required, wrench tighten one turn

past finger tight .

TOOLS AND MATERIALS REQUIRED (Not

supplied)

254mm (10") adjustable wrench

305mm (12") pipe wrench

Metal file (file cut)

Tape measure

Tubing cutter

Level

Hacksaw

Putty knife

Screwdriver

Toilet gasket (wax seal)

Toilet T-bolts (2), 8mm (5/16") diameter

Toilet supply shut-off valve, 10mm(3/8 ) recommended

NOTICE:

If the existing toilet does not have a supply shut-off

valve below the tank, install one before installing the new

toilet.

1285052-T01-A

. The fill valve

140mm

305/400mm(

2013

)

GB 6952-2015

254mm

305mm

8mm T

-2-

)

305/400mm

ASME

(

A112.19.2-

10mm