Kohler ESCALE K-23137T-BNS Manual de instrucciones de instalación - Página 23
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Aseos Kohler ESCALE K-23137T-BNS. Kohler ESCALE K-23137T-BNS 45 páginas.
Imprimir página
Three. Mechanical faceplate reserved access panel
installation, method one: press from front only
Faceplate No.:
三 . 机械面板预留检修口安装方式，仅有前按安装方式
面板编号：
K-4177T
K-20341T
K-75891T
Remove the cover, install the mask in the block screen of
the tank, and tighten the screw to fixate the mask to the
tank.
Note: Do not remove and discard the mask cover before
installation of the water tank faceplate.
Foreign matters and dusts should be prevented from
entering the water tank during construction.
将遮板取下，将方外罩装在水箱上原遮板的位置，并拧紧螺
丝使方外罩紧固在水箱上。
注： 方外罩遮板，安装水箱面板前请勿移除和废弃。
避免施工过程中异物及灰尘进入水箱。
1E� Brickwork of the wall
1E. 砌墙
1. Protection of inlet hole and drainage hole
1. 进、排水口防护
As shown, tighten the long screw into the holes of the tank
bracket and cover the drainage hole with the big cap, cover
the inlet hole with the small cap.
Note: 1. The screw head ' 一 ' slot is facing outward.
2. Install screw protective hose, do not remove it
before installing the toilet.
如图将长螺杆旋入水箱架的螺丝孔上，再将大防物盖装在排
污口上，小防物盖装在进水口上。
注： 1. 螺杆一字头朝外。
2. 螺杆防护套安装好，安装座便器前不要取下来。
2. Brickwork wall thickness, follow: 1D Installations
of reserved access panel
2. 施工假墙厚度，按照步骤 1D：预留检修口安装
A. Press from front : Brickwork wall thickness 8~69mm from
the front of tank.
A. 前按：假墙厚度距水箱正面 8~69mm。
B. Remote installation: Brickwork wall thickness follow: 1D
Installations of reserved access panel, remote installation
part of normal pneumatic faceplate reserved access panel.
B. 远程安装：假墙厚度见 1D：预留检修口安装，常规气动面
板预留检修口的远程安装部分。
1456149-K2-A
K-8857T
K-75890T
K-77271T
Inlet Hole
进水口
Drainage Hole
排污口
-16-
Mask
方外罩
Cover
遮板
Screw
螺丝
Water Tank
水箱
Tank Bracket
水箱架
Small Cap
小防物盖
Long Screw
长螺杆
Big Cap
大防物盖