Kohler Escale K-25091T-S Manual de instrucciones de instalación - Página 22

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Aseos Kohler Escale K-25091T-S. Kohler Escale K-25091T-S 30 páginas. Floor standing toilet
También para Kohler Escale K-25091T-S: Manual de instrucciones de instalación (23 páginas), Manual de instrucciones de instalación (11 páginas), Manual de instrucciones de instalación (28 páginas)

2. Make sure of h according to dimensions of bowl and then

locate the installation hole of fixing bracket. Mark on the

wall for appropriate position for fixing bracket, and drill four

holes with diameter of 10mm and depth of 80mm with

churn drilling as shown in illustration, and fill in the holes

with bulge screw and tighten the screw to set the fixing

bracket.

Note: Ensure the fixing bracket to remain level.

10mm

80mm

3. Put the tank onto the fixing bracket as shown in the right

figure and adjust the tank to level . Then tighten screws

with hex-head key.

Note:

it is a must to keep the tank level.

4. Connect with overflow pipe on the side when installing

K-78073K-PNE/K-78075K-PNE.

4. K-78073K-PNE/K-78075K-PNE

5. Connect tap water braided tube on the top of water tank for

water supply as shown.

Note: 1. Ensure water tank internal valve is OFF.

2. Suggestion: connect a temporary rubber or plastic

hose on valve, flush water supply pipeline. Ensure

water is clean, no residual sand stone or fouling

inside pipeline.

1288818-T01-B

-16-

Overflow Pipe

Connecting Pipe

Water Pipe

Bulge Screw

Fixing Bracket

Gasket

Spring

Nut

Level

Tank

Loosen

Tighten

Medium

Allen Key

Screw